RUGS Meeting #84 - Tuesday, 8th March 2011 - Cadgroup

Agendas and minutes for user group meetings

Moderators: Tim Waldock, corinoco, Wesley

Will you be attending?

Poll ended at 08 Mar 2011, 14:53

Yes - Ultimo TAFE is so handy for me..
28
82%
No Thanks
6
18%
 
Total votes : 34

RUGS Meeting #84 - Tuesday, 8th March 2011 - Cadgroup

Postby Toby Maple » 28 Feb 2011, 14:53

Venue: Ultimo TAFE
Room W3-06, Level 3 Marcus Clarke Building, 827-837 George Street, Broadway


Remember the change of Address! This year we will be meeting at Ultimo TAFE

Directions and details

If you are coming from Central via Devonshire Street tunnel, take the escalator up to the Western side of Broadway. The entry to the Marcus Clarke Building (W) is between the escalators for the Devonshire Street tunnel. There is also signage under the street canopy identifying ’Marcus Clarke’ – large brick opening and sliding doors to the general lobby and lifts.
Coming by car there is a parking station on the corner of Ultimo Road and Quay Street, Ultimo, behind the Marcus Clarke Building.
We are located on Level 3, leaving the lift turn left to face the studios and W3-06 is on the left hand side of the corridor to the right.

http://maps.google.com.au/maps?q=ultimo ... 16&iwloc=A



Time: 5:45pm Meet and Greet. 6.00pm Meeting start
Cost: $5 – where else can you get 2hrs worth of training and networking for that price? Please help to keep the group sustainable and pay the $5.
We can’t have food in the TAFE room so please grab a bite to eat before – there will be some of us that will get a bite at a local eatery after too.

Please come back to and check as it will be updated as any changes occur. Also please use the poll (at the top of the post) to indicate whether you will be attending or not. You will need to be logged in to the RUGSYD site to vote.
You can also change your vote, if you decide you can’t come on the night. This will allow us to accurately predict numbers for room layout, etc.

• 6.00pm - Open Up – Toby Maple

• 6.15pm – Back to Basics – Phasing
This year we are going “Back to Basics”. With so many people moving to Revit and a constant influx of new and beginner users, RUGSYD is keen to show the basics of the software. This will be followed by some other users experience of using the software – which in theory – should benefit all.
• 6.45pm – Advanced - Phasing
This will follow the begineer presentation, with some more advanced uses for the tools.

• 7.15pm - Lock-up – Tips & Tricks - Open to all
Got a great tip you want to share with fellow users? need to ask that burning question, so you can sleep at night again. This is your chance to discuss all things Revit amongst like minded users.

• 7.45pm - Meeting closes – Toby Maple
If you know of anyone who would be interested in attending, please encourage them to come along as well. The larger and more active the group, the more value it is to all involved. You can sign up here http://www.rugsyd.com.au/ , it’s free to join the website – Monthly Meetings $5
Toby Maple
-------------
Revit Users Group Sydney
Chairman
User avatar
Toby Maple
Active member
 
Posts: 238
Joined: 26 Apr 2006, 21:33
Location: The Rocks - Sydney
Company: HASSELL
When did you start to use Revit?: v4.1 2002

Re: RUGS Meeting #84 - Tuesday, 8th March 2011 - Cadgroup

Postby barry1314 » 07 Mar 2011, 11:37

Thanks Toby.

Barry
barry1314
 


Return to Meetings

Who is online

Users browsing this forum: No registered users and 3 guests

cron